Installing And Replacing Components; Before You Begin - EKF SC1-ALLEGRO User Manual

User Guide • SC1-ALLEGRO •

Installing and Replacing Components

Before You Begin

Warnings
The procedures in this chapter assume familiarity with the general terminology associated with
industrial electronics and with safety practices and regulatory compliance required for using and
modifying electronic equipment. Disconnect
any telecommunication links, networks or
procedures described in this chapter. Failure
links before you open the system or perform
or equipment damage. Some parts of the
the power switch is in its off state.
Caution
Electrostatic discharge (ESD) can damage components. Perform the procedures described in this
chapter only at an ESD workstation. If such a
some ESD protection by wearing an
metal part of the system chassis or board
original ESD protected packaging. Retain the
antistatic box) in case of returning the board to EKF for repair.
© EKF
CompactPCI ® Serial
CPU Board • Intel® i7-3xxx Processor
the system from its power source and from
modems before performing any of the
to disconnect power, or telecommunication
any procedures can result in personal injury
system can continue to operate even though
station is not available, you can provide
antistatic wrist strap and attaching it to a
front panel. Store the board only in its
original packaging (antistatic bag and
-42- ekf.com