Konica Minolta Magicolor 2300W User Manual page 99

Symptom
Image is
blurred;
background is
lightly stained;
there is
insufficient
gloss of the
printed
image.
The print or
color density
may be
uneven.
Irregular
print or
mottled
image
appears.
Solving Problems with Printing Quality
Cause
One or more of the
toner cartridges are
defective.
The OPC drum may
be misinstalled or
defective.
One or more of the
toner cartridges may
be near empty or
damaged.
The OPC drum
cartridge may have
been misinstalled or
is defective.
The printer is not on a
level enough surface.
The media is moist
from humidity.
Humidity may be too
high.
Media with
specifications not
covered by the printer
warranty is being
used.
One or more of the
toner cartridges are
defective.
The OPC drum
cartridge is damaged.
Solution
Remove the toner cartridge and check
for damage. If it is damaged, replace it
(Status Display's Print/Toner
Replace... menu).
Reinstall the OPC drum cartridge. If it
is damaged, replace it.
Install new toner cartridges (Status
Display's Print/Toner Replace...
menu).
Reinstall the OPC drum cartridge. If it
is damaged, replace it.
Level the printer (not exceeding ±1°
slant at any point around the machine).
Remove the moist media and replace it
with new, dry media.
Adjust the humidity in the paper
storage area.
Use media that is covered by the
printer warranty.
Remove the toner cartridge and check
for damage. If it is damaged, replace it
(Status Display's Print/Toner
Replace... menu).
Remove the OPC drum cartridge and
check for damage. If it is damaged,
replace it.
91