Status, Error, and Service Messages
Status, error, and service messages are displayed in the Status Display. They
provide information about your printer and help you locate many problems.
When the condition associated with a displayed message has changed, the
message is cleared from the Status Display message window.
Standard Status Messages
This message...
Canceling Job
Energy Saver
Printer Idle
Printing
Processing
Warming Up
Error Messages
This message...
Put COLOR Toner
Cartridge
Drum is not Attached The OPC drum
No Duplex Unit
96
means...
The job is being cancelled.
The printer is in Energy
Saver mode to reduce
power consumption during
periods of inactivity. When a
print job is received, the
printer returns to normal
power within 180 seconds.
The printer is on and ready
to receive data.
The printer is printing.
The printer is processing
data.
The printer is warming up.
means...
The indicated toner
cartridge is not
installed properly.
cartridge is not
installed.
Duplex printing was
specified with the
printer driver, but the
duplex unit is not
attached to the
printer.
Status, Error, and Service Messages
do this...
No action needed.
do this...
Install the indicated
toner cartridge.
Install the OPC drum
cartridge.
Stop the print job, and
then either change the
printer driver setting or
attach the duplex unit to
the printer.