Konica Minolta Magicolor 2300W User Manual page 94

Symptom
Booklet Left
and Right
Binding
output is
incorrect.
The printer
pauses
approxi-
mately 90
seconds.
86
Cause
Both the driver and
the application have
been set for collation.
The printer pauses
for the color
calibration procedure
(also known as the
Auto-Image Density
Control [AIDC] cycle).
This process is
provided to make
sure reliable printer
operation with
optimum output
quality. If you open
the door before the
Ready indicator on
the control panel
lights up and the
Error indicator turns
off, the printer stops
and repeats the
calibration cycle.
Solution
For Booklet Left Binding and Booklet
Right Binding, choose Collate only in
the driver's Paper Tab. Do not set
collation in the application.
Wait while your printer automatically
pauses to do an AIDC calibration cycle
after 200 1-sided pages of a
continuous print run.
Solving Other Problems