Konica Minolta Magicolor 2300W User Manual page 29

2
Adjust the media guides to fit the
appropriate media sizes.
3
Load the media face up, short edge (or
letterhead) first.
Often, an arrow on the paper package
label indicates the face-up (printing)
side of the paper.
A fill limit mark is provided on the
inside of the media guides on
Tray 1 (the multipurpose tray).
Tray 1 holds 200 sheets of 22 lb
bond (80 g/m²) paper.
4
Slide the media guides up against the
edge of the media.
Attention
Always adjust the media guides after inserting the media. Media
guides that are not properly adjusted can result in poor print quality,
media jams, or printer damage.
5
In the printer driver, select the appropriate media mode. Then print
the job.
Loading Media
21