Error Messages - Konica Minolta magicolor 3730DN User Manual

This message...
PROCESSING
READY
REBOOTING
WARMING UP
WAITING

Error Messages

This message...
FUSER LIFE LOW
FUSER LIFE END
INCORRECT
X T/C
SIZE MISMATCH
7-36
means...
The printer is processing
data.
The printer is on and ready
to receive data.
The printer is being
restarted.
The printer is warming up.
While data is being pro-
cessed, there was an inter-
ruption of at least one
second in the data.
means...
The time to replace
the fuser is near.
The fuser unit has
reached the end of its
life.
The X toner cartridge
is an unapproved
type.
The media size set in
the printer driver is
different from the
size/type of media
loaded.
Status, Error, and Service Messages
do this...
No action needed.
do this...
Prepare the replacement
fuser.
Replace the fuser unit
and reset the counter in
the
ENGINE SERVICE
/ ENGINE SUP-
PLIES REPLACE /
SUPPLIES REPLACE
menu.
FUSER UNIT
Printing can
continue,
however, the
printing result are
not guaranteed.
Install a
KONICA MINOLTA toner
cartridge of the appropri-
ate type (AM, EU, AP or
GC). See page 5-7.
Load media of the cor-
rect size.