Konica Minolta magicolor 3730DN User Manual page 141

Symptom
Not all pages
print.
Printer
resets or
turns off fre-
quently.
7-26
Cause
The printer has the
wrong kind of cable,
or the printer is not
configured for the
correct cable and
port.
The Cancel key was
pressed.
The tray is empty.
A document is printed
with an overlay file
which has been cre-
ated by an unsuit-
able driver.
The machine tried to
feed paper from Tray
2 while paper is
loaded into Tray 1.
The power cord is not
correctly plugged into
the outlet.
A system error
occurred.
Solution
Check your cable.
Make sure no one pressed the Cancel
key while your job was printing.
Check that the trays are loaded with
media, in place, and secure.
Print the overlay file using a suitable
driver.
Paper cannot be fed from Tray 2 if
paper is loaded into Tray 1. In order to
use Tray 2, remove all paper from Tray
1.
Turn off the printer, confirm that the
power cord is correctly plugged into the
outlet, and then turn on the printer.
Contact Technical Support with the
error information.
Solving Other Problems