Konica Minolta magicolor 3730DN User Manual page 153

This message...
TRANS. ROLLER END
WASTE:
NEAR FULL
USB DEVICE ERR.
N.W. DEVICE ERR.
DUPLEX JOB ERR.
FEED ERR.
COVER OPEN
FRONT
COVER OPEN
SIDE
DRAWER OPEN
TRAY 2
REMOVE PAPER
TRAY1
7-38
means...
The transfer roller has
reached the end of its
life.
The waste toner bot-
tle is nearly full.
An error has occurred
on the connected
USB device.
An error has occurred
on the connected net-
work device.
An error has occurred
during duplex (dou-
ble-sided) printing.
The media size set in
the printer driver is
different from the
size/type of media
loaded.
The printer's front
cover is open.
The printer's right
side cover is open.
Tray 2 is open.
Paper remains loaded
in Tray 1.
Status, Error, and Service Messages
do this...
Replace the transfer
roller and reset the
counter in the
ENGINE
SERVICE / ENGINE
SUPPLIES REPLACE
/ SUPPLIES
REPLACE TRANS.
menu.
ROLLER
Printing can
continue,
however, the
printing result are
not guaranteed.
Prepare a new waste
toner bottle.
Check the device.
Check the device.
Make sure that the cor-
rect media is being
used.
Load media of the cor-
rect size.
Close the front cover.
Close the right side
cover.
Correctly install Tray 2.
Remove all paper from
Tray 1.