Konica Minolta magicolor 3730DN User Manual page 155

This message...
MEDIA JAM
DUPLEX LOWER
MEDIA JAM
DUPLEX UPPER
MEDIA JAM
TRANSFER ROLLER
MEDIA JAM
TRAY1
MEDAI JAM
TRAY2
MEDIA JAM
EXIT
MEDIA JAM
UNDEFINED
MEDIA JAM
FUSER
X TONER
NOT INSTALLED
7-40
means...
Media has misfed in
the duplex.
Media has misfed in
the duplex.
Media has misfed in
the transfer roller
area. This type of
misfeed means that
the media did not
make it to the media
exit area.
Media has misfed in
Tray 1.
Media has misfed
while being pulled
from Tray 2.
A media misfeed has
occurred at the media
outlet slot.
A media misfeed has
occurred at an
unspecified location.
Media has misfed
leaving the fuser
area.
The enclosed toner
cartridges are not
installed.
The X toner cartridge
is not installed, or an
unapproved toner
cartridge is installed.
Status, Error, and Service Messages
do this...
Refer to "Media Misfeed
Messages and Clearing
Procedures" on
page 7-6, and remove
the misfed media.
Refer to "Media Misfeed
Messages and Clearing
Procedures" on
page 7-6, and remove
the misfed media.
Be sure to install the
enclosed toner car-
tridges.
Install a correct KONICA
MINOLTA toner car-
tridge.