Konica Minolta magicolor 3730DN User Manual page 152

This message...
TYPE MISMATCH
TRAY 2 EMPTY
REPLACE TONER X
X TONER LOW
TRANSFER LOW
TRANSFER END
TRANS.ROLLER LOW
Status, Error, and Service Messages
means...
The media type set in
the printer driver is
different from the
size/type of media
loaded.
Tray 2 is empty.
Tray 2 is not correctly
installed.
The X toner cartridge
is empty.
The X toner cartridge
is low and should be
replaced within 1,200
pages at 5% cover-
age of letter/A4
pages.
The time to replace
the transfer belt unit is
near.
The transfer belt unit
has reached the end
of its life.
The time to replace
the transfer roller is
near.
do this...
Load media of the
correct type.
Load media into the
specified tray.
Correctly install the
specified tray.
Replace the toner car-
tridge.
Prepare the specified
color toner cartridge.
Prepare the replacement
transfer belt unit.
Replace the transfer belt
unit and reset the
counter in the
ENGINE
SERVICE / ENGINE
SUPPLIES REPLACE
/ SUPPLIES
REPLACE TRANS.
menu.
BELT
Printing can
continue,
however, the
printing result are
not guaranteed.
Prepare the replacement
transfer roller.
7-37