Konica Minolta magicolor 3730DN User Manual page 35

All factory default values are shown in bold.
ENERGY
SAVER
AUTO
CONTINUE
ENGINE
SERVICE
3-10
Settings
120 minutes/60 minutes/30 minutes/
15minutes
Specify the length of time until the machine enters Energy
Saver mode.
The machine does not enter Energy Saver mode if
paper has been loaded into Tray 1.
Settings
ON/OFF
Select whether or not printing continues if the size or type of
media in the selected tray is different from the size or type of
media for the print job.
If
AUTO CONTINUE
continues if any of the following occur. Printing will be
performed even if the media size is different.
Different media size/type:
TYPE MISMATCH
(page 7-41)
TOTAL FACE
COUNT
COLOR FACE
COUNT
BW FACE COUNT
BOOT VER.
FPGA VER.
CONTROLLER
VER.
ENGINE VER.
COLOR
CALIBRATION
is set to , printing automatically
ON
SIZE MISMATCH
(page 7-37)/
PUT MEDIA: TRAY X
Displays the total page side counter.
Displays the total page side counter for
color printing.
Displays the total page side counter in
black-and-white printing.
Displays the boot version.
Displays the FPGA version.
Displays the controller version.
Displays the engine version.
Settings
YES/NO
If is selected, color calibration is
YES
performed.
(page 7-36)/
ENGINE