Table of Contents
Advertisement
43:
The File field indicates the
maximum character length of the
File Name field in the Job
Accounting file. File names are
assigned with QMS DOC.
44:
The Charge field indicates the
maximum character length of the
Charge Number field in the Job
Accounting file. Charge
numbers are assigned with QMS
DOC.
Accounting files should be transferred to your host computer periodi-
cally to keep the printer from being overloaded with data and to allow
you easy analysis of data.
ls
Copy the accounting information in one of the following ways, which
are described in detail in the next section.
Use the Copy to Floppy Accounting menu option
Use the cp command from a remote console
Use the File Transfer Protocol (FTP) if a TCP/IP connection is
available to the printer
This option copies each of the accounting files to 1.44 MB floppy
disks, using the printer's internal floppy drive.
1
Insert a 3.5", DOS-formatted floppy disk into the printer's
internal floppy disk drive.
Pull the control panel toward you to open the front of the printer
and access the floppy disk drive.
cp
43: 31
The File Name
can be up to 31
characters
44: 31
The Charge
field can be up
to 31 characters
ls
Advertisement
Table of Contents
