Connection; Def Job Prio; Optional Interface - QMS 2025 Administrator's Manual

The Connection set-up option defines the type of connection you are
using. The options are Conventional and Spool, with Conventional
being the default. Spool allows you to use the AppleTalk protocol that
manages interaction between workstations and print servers. This
option allows print spooling. Conventional does not provide print
spooling. Select Conventional to print directly to the printer. Any
change to this option takes effect only after turning the printer power
off and on again.
This five-digit value sets the minimum number of kilobytes of system
memory dedicated to the AppleTalk interface. The range is 0 to 99999
seconds and the default is 00015. See "Dedicating Memory to an
Interface," in chapter 7, "Memory Submenu," for information about the
Min K Spool setting.
The Def Job Prio (Default Job Priority) option determines which jobs
are printed first, according to the interface from which they are
received, when jobs are received simultaneously. The range is from
001 to 100. The default is 001, which is the highest priority.
You can order an optional interface for your QMS printer so you can
connect to other networks. If an optional interface is installed, it
appears in the Communications submenu. Refer to the interface doc-
umentation and to your network documentation for information on
connecting your printer to the network and configuring it for network
printing.