Daikin MCK70YVM Operation Manual page 19

MODE
Automatic airfl ow rate adjustment
FAN setting (Quiet, Low, Standard, High*) is automatically adjusted according to the degree of air
impurity and humidity (when the Humidifying operation is active).
AUTO FAN
Purifying capacity increases as airfl ow rate rises.
* The maximum airfl ow rate during AUTO FAN MODE is "High", which is less powerful than "Turbo".
• Press
• Degree of air impurity corresponds to the volume of dust and the intensity of odours in the ambient air.
Saving energy
In Power saving mode within ECONO MODE, the FAN setting automatically switches between Quiet
and Low only. Power consumption (*1) and operating sounds are reduced.
If the air is clean and the set humidity level has been achieved (when the Humidifying operation is
active), after a short while, Monitoring mode automatically activates.
Recommended for use during sleep hours.
*1 By comparison to AUTO FAN MODE (about 12.6Wh), power consumption in ECONO MODE (about
6.7Wh) is about 5.9Wh lower.
Test conditions: operation in 10m² area over 1 hour. Assuming 1 cigarette was smoked immediately after
the unit was turned on.
Power saving mode
ECONO
FAN setting switches
automatically between
Quiet and Low.
• As the FAN setting is limited to Quiet and Low, air purifying and humidifying capacity is reduced.
• As air is not drawn in when the fan has stopped, the dust/PM2.5 sensor, odour sensor, and humidity
sensor reduce in sensitivity. To prevent this reduction in sensitivity, turn Monitoring mode OFF.
• FAN setting is adjusted automatically. Airfl ow cannot be adjusted manually.
• Press
Reducing pollen levels
ANTI-
A gentle air current is created by switching every 5 minutes between the FAN setting Standard and
POLLEN
Low so that pollen can be drawn in and caught before it reaches the fl oor.
• Press
Usage and Function
to select the humidity level.
If the air is clean and the set
humidity level has been
achieved, after a short while...
If the humidity level falls, or
dust or odours are
detected...
to select the humidity level.
to select the humidity level.
Monitoring mode
• The fan starts and stops periodically.
Dust, odours, and the humidity level are
monitored.
• The following functions are turned off, further
reducing power consumption.
Streamer Humidifying
OFF
Active plasma ion
OFF
*2 The humidifi er ON/OFF lamp remains lit up.
Operation
(*2)
OFF
►Page 25
18