Basic Fax Operation; Sending A Fax Using The Adf - Konica Minolta Magicolor 2590 MF User Manual

Basic Fax Operation

This section contains basic information of fax transmission.
Only Statement (ST), Letter (LT), Legal (LG), A5, or A4 size docu-
ments are available for fax transmission.

Sending a Fax Using the ADF

If the ADF is used, original documents containing multiple pages can be auto-
matically scanned.
Do not load original documents that are bound together, for example,
with paper clips or staples.
Do not load more than 50 sheets; otherwise an original document mis-
feed or damage to the document or machine may occur.
If the original document is not loaded correctly, it may not be fed in
straight, or an original document misfeed or damage to the document
may occur.
Do not open the ADF cover while documents loaded into the ADF are
being scanned.
1
Press the Fax key to enter Fax mode.
2
Make sure that there is no document on the original glass.
3
Put the document into the ADF
document feed tray face up.
4
Adjust the document guides to the document size.
5
Press the Resolution key to specify the desired image quality.
The document image quality can be adjusted by pressing the Resolu-
tion key. For details, refer to "Improving Resolution" on page 34.
6
Specify the fax number of the recipient in one of the following ways:
–
Direct dialing
–
Using the one-touch dial key (including the group dial function)
30 Basic Fax Operation