Assembly Replacement Sequence - Keysight N5224B Series Service Manual

2-port and 4-port pna microwave network analyzers 900 hz/10 mhz - 43.5/50 ghz

Hide thumbs Also See for N5224B Series:

Table of Contents

Replaceable Parts

Assembly Replacement Sequence

The following steps describe how to replace an assembly in the network

Step 1. Identify the faulty group. Begin with

with the appropriate troubleshooting chapter that identifies the faulty

Step 2. Order a replacement assembly. Refer to this chapter.

Step 3. Replace the faulty assembly and determine what adjustments are necessary.

Step 4. Perform the necessary adjustments. Refer to

Adjustments."

Step 5. Perform the necessary performance tests. Refer to

Adjustments."

Step 6. Keysight personnel: see

stickers should be placed on the PNA.

Keysight N5224B/25B Service Guide

Chapter 7, "Repair and Replacement Procedures."

Figure 1-1 on page 6

Chapter 4, "Troubleshooting."

Chapter 3, "Tests and

to review where the calibration

Show Quick Links

Table of Contents

N5225b series