Switching The Server On And Off - PRIMERGY Econel 230R S1 Operating Manual

Switching the server on and off

5.2 Switching the server on and off
V
CAUTION!
If nothing appears on the screen but flickering stripes after switching on
the server, switch the server off immediately (see section
stripes on monitor screen" on page
The On/Off button does not disconnect the server from the mains. To
disconnect from the mains completely, remove the power plug(s).
Switching the server on
The power-on indicator (item 10 in
– Starting up for the first time:
Ê Press the On/Off button (position 7 in
The power on indicator lights up green (item 10 in figure
page 51).
Ê Insert ServerStart disc 1 in the CD/DVD drive.
Ê Follow the on-screen instructions (see also
ServerStart" on page 61
on page 62).
– System already installed:
Ê Press the On/Off button (position 7 in
The power-on indicator lights up green (item 10 in figure
page 51).
The server is switched on, performs a system test and boots the
operating system.
58
67).
figure 11 on page
figure 11 on page
or section "Configuration without ServerStart"
figure 11 on page
Operating manual
Starting up and operation
"Flickering
51) lights red.
51).
figure 11 on
section "Configuration with
51).
figure 11 on
Econel 230R S1