Connecting The Server To The Mains - PRIMERGY Econel 230R S1 Operating Manual

Hardware installation
4.4

Connecting the server to the mains

With the basic configuration, the server has a fixed power supply unit.
V
CAUTION!
The server is automatically set to a mains voltage in the range 100 V -
127 V or 200 V - 240 V. Make sure that your local mains voltage is within
the correct range.
2
Figure 10: Connecting the server to the mains
Ê Connect the insulated connector on the power cord (1) to the server power
supply.
Ê Connect the mains connector (2) to an outlet on the rack's socket strip (see
also Technical Manual for the rack).
Econel 230R S1
Connecting the server to the mains
1
Operating manual 49