Rear Of Server - PRIMERGY Econel 230R S1 Operating Manual

Table of Contents

Advertisement

Controls and displays
5.1.2

Rear of server

Indicators on connection panel (Global Error indicator and ID indicator)
1
2
Figure 14: Global Error indicator and ID indicator
1 ID indicator (blue)
Lights blue when the system has been selected by pressing the ID button
on the front. To deactivate, press the button again.
The ID indicator on the front also lights up at the same time. The two ID
indicators are synchronized.
The ID indicator can also be activated via ServerView and its status reported
to ServerView.
2 Global Error indicator (red)
Does not light up when the system is OK. No service incident or critical
event has occurred.
Lights up red when a predictable error has been detected. Users can check
the system and event log or via ServerView for more detailed information.
Flashes red when a critical event has occurred. Users can check BIOS
Setup, system- and eventlog or via ServerView for event details.
If the event is still acute after a power failure, the indicator is activated after
the restart.
56
Operating manual
Starting up and operation
Econel 230R S1

Advertisement

Table of Contents
loading

Table of Contents