Configuring The Server; Configuring Onboard Sas Controller - PRIMERGY Econel 230R S1 Operating Manual

Configuring the server

– IPMI
The server is switched on by an IPMI console via serial port COM1 (item 8
in figure 8 on page
5.3 Configuring the server
This section contains information about configuring the server and installing the
operating system.
I
Make sure that the energy saving functions are disabled in the BIOS Setup
during server operation.
5.3.1

Configuring onboard SAS controller

The server has an onboard SAS controller with "Integrated Mirroring Enhanced"
functionality. You can configure the Onboard-SAS-Controller either before or
during ServerStart. Using ServerStart is recommended.
I
A separate utility is available to the controller for IME configuration.
Further information can be found in the "Integrated RAID for SAS User's
Guide" (on the ServerBooks DVD under "Controllers").
I
Descriptions of operating systems not covered in the RAID controller
manual are provided in the appropriate readme files on the driver CDs.
60
47) or via LAN port M (item 3 in
Operating manual
Starting up and operation
figure 8 on page
Econel 230R S1
47).