Install Memory - PCchips M765VMRT Manual

Chapter 2
7. If the processor is installed with a cooling fan assembly,
connect the cable from the fan to the CPU fan power connector
FAN1.

Install Memory

The mainboard has three DIMM slots which can be installed with
memory modules. You must install at least one memory module in
order to use the mainboard.
For this mainboard, you must use 168-pin, 3.3V memory modules
installed with SDRAM memory chips. If you are using a processor
cartridge that runs on a 66/100 MHz system bus, you must use
memory that operates on a 66/100 MHz memory bus. If you are
using a processor cartridge that runs on a 133 MHz system bus,
you can use memory that operates on a 100 or 133 MHz memory
bus. You can install any size of memory module from 16 MB up to
256 MB, so the maximum memory size is 3 x 256 MB = 768 MB.
The edge connectors on the memory modules have cut outs, which
coincide with struts in the DIMM slots, so the memory modules
can only be installed in the correct way.
On the DIMM slot, pull the locking latches at either end of the
slots outwards. Position the memory module correctly and insert it
into the DIMM slot. Press the module down into the slot so that the
locking latches lever inwards and lock the module in place.
12
DIMM1
DIMM2
DIMM3