Display Assembly - Dell Studio 1745 Service Manual

Back to Contents Page
Display
Dell Studio™ 1745/1747 Service Manual
Display Assembly
Display Bezel
Display Panel
Display Panel Cable
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
Display Assembly
Removing the Display Assembly
1. Follow the procedures in
2. Remove the battery (see
3. Remove the base cover (see
4. Disconnect the antenna cables from the Mini-Card(s) (see
5. Disconnect the subwoofer assembly cable from the subwoofer assembly cable connector on the system board (see
6. Remove the two screws from the computer base.
1 antenna cables
7. Remove the center control cover (see
8. Remove the keyboard (see
9. Remove the media controls board (see
10. Remove the screw that secures the display cable to the computer base.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Battery).
Removing the Base Cover).
2 subwoofer assembly cable
Removing the Center Control
Removing the Keyboard).
Removing the Media Controls
UserManuals.info
Removing the
Removing the Mini-Card).
Cover).
Board).
Battery) before working inside the
Removing the Palm Rest).