1
Replacing the Optical Drive
1. Follow the procedures in
2. Connect the interposer to the optical drive.
3. Align the connector on the optical drive with the connector on the system board and press the optical drive until it is fully seated.
4. Replace the three screws that secure the optical drive to the computer base.
5. Replace the media card reader board (see
6. Replace the palm rest (see
7. Replace the media controls board (see
8. Replace the keyboard (see
9. Replace the center control cover (see
10. Replace the battery (see
Back to Contents Page
Great user manuals database on
interposer
Before You
Begin.
Replacing the Media Card Reader
Replacing the Palm
Rest).
Replacing the Media Controls
Replacing the
Keyboard).
Replacing the Center Control
Replacing the
Battery).
UserManuals.info
Board).
Board).
Cover).