Dell Studio 1745 Service Manual page 27

4. Align the screw holes on the display panel with the holes on the display cover.
5. Replace the eight screws that secure the display panel to the display cover.
6. Route the antenna cables, power button cable, and display cable through the hinge latches.
7. Replace the display bezel (see
8. Replace the display assembly (see
Display Panel Cable
Removing the Display Panel Cable
1. Follow the instructions in
2. Remove the display assembly (see
3. Remove the display bezel (see
4. Remove the display panel (see
5. Turn the display panel over and place it on a clean surface.
6. Lift the tape that secures the display cable to the display board connector and disconnect the display cable.
1 display board connector
3 display cable
Replacing the Display Panel Cable
1. Follow the procedures in
2. Connect the display cable to the display board connector and secure it with the tape.
3. Replace the display panel (see
4. Replace the display bezel (see
5. Replace the display assembly (see
Back to Contents Page
Great user manuals database on
Replacing the Display Bezel).
Replacing the Display Assembly).
Before You Begin.
Removing the Display Assembly).
Removing the Display Bezel).
Removing the Display Panel).
2 tape
4 back of the display panel
Before You Begin.
Replacing the Display Panel).
Replacing the Display Bezel).
Replacing the Display Assembly).
UserManuals.info