Removing The Camera; Replacing The Camera - Dell Studio 1745 Service Manual

Back to Contents Page
Camera
Dell Studio™ 1745/1747 Service Manual
Removing the Camera
Replacing the Camera
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
Removing the Camera
1. Follow the procedures in
2. Remove the battery (see
3. Remove the base cover (see
4. Disconnect the antenna cables from the Mini-Card(s) (see
5. Disconnect the subwoofer assembly cable from the subwoofer assembly cable connector on the system board (see
6. Remove the center control cover (see
7. Remove the keyboard (see
8. Remove the media controls board (see
9. Remove the display assembly (see
10. Remove the display panel (see
11. Remove the two screws that secure the camera module to the display cover.
12. Remove the camera module.
1 screws (2)
3 camera cable connector
Replacing the Camera
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Battery).
Removing the Base Cover).
Removing the Center Control
Removing the Keyboard).
Removing the Media Controls
Removing the Display
Removing the Display
2
UserManuals.info
Removing the
Removing the Mini-Card).
Cover).
Board).
Assembly).
Panel).
camera
Battery) before working inside the
Removing the Palm Rest).