Removing The Usb Board - Dell Studio 1745 Service Manual

Back to Contents Page
USB Board
Dell Studio™ 1745/1747 Service Manual
Removing the USB Board
Replacing the USB Board
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
Removing the USB Board
1. Follow the procedures in
2. Remove the battery (see
3. Remove the center control cover (see
4. Remove the keyboard (see
5. Remove the media controls board (see
6. Remove the palm rest (see
7. Remove the media card reader board (see
8. Remove the optical drive (see
9. Lift the latch to disconnect the USB board cable from the USB board cable connector on the system board.
10. Remove the screw that secures the USB board to the computer base.
11. Make note of the USB board cable routing and pry up the USB board cable.
12. Remove the USB board from the computer base.
1 USB board cable
3 screw
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Battery).
Removing the Center Control
Removing the Keyboard).
Removing the Media Controls
Removing the Palm Rest).
Removing the Media Card Reader
Removing the Optical
2 USB board
4 USB board cable connector
UserManuals.info
Removing the
Cover).
Board).
Board).
Drive).
Battery) before working inside the