Replacing The Usb Board - Dell Studio 1745 Service Manual

Replacing the USB Board
1. Follow the procedures in Before You
2. Align the hole on the USB board with the protrusion on the computer base.
3. Replace the screw that secures the USB board to the computer base.
4. Route the USB board cable and press down on the latch to connect the USB board cable to the USB board cable connector on the system board.
5. Replace the optical drive (see
6. Replace the media card reader board (see
7. Replace the palm rest (see
8. Replace the media controls board (see
9. Replace the keyboard (see
10. Replace the center control cover (see
11. Replace the battery (see Replacing the
Back to Contents Page
Begin.
Replacing the Optical Drive).
Replacing the Media Card Reader
Replacing the Palm Rest).
Replacing the Media Controls
Replacing the Keyboard).
Replacing the Center Control
Battery).
Board).
Board).
Cover).