Dell Studio 1745 Service Manual page 25

Hide thumbs Also See for Studio 1745:
Table of Contents

Advertisement

 
5. Connect the display cable, camera cable, and power button cable to the respective system board connectors.
 
6. Replace the screw that secures the display cable to the computer base.
 
7. Replace the media controls board (see
 
8. Replace the keyboard (see
 
9. Replace the center control cover (see
 
10. Replace the two screws at the bottom of the computer.
 
11. Connect the subwoofer assembly cable to the subwoofer assembly cable connector on the system board.
 
12. Connect the antenna cables to the Mini-Card(s) (see
 
13. Replace the base cover (see
 
14. Replace the battery (see
 Display Bezel
 
Removing the Display Bezel
 
CAUTION:
 
1. Follow the procedures in
 
2. Remove the display assembly (see
 
3. Using your fingertips, carefully pry up the inside edge of the display bezel.
 
4. Remove the display bezel.
1
display bezel
 
Replacing the Display Bezel
 
1. Follow the procedures in
 
2. Realign the display bezel over the display panel, and gently snap into place.
 
3. Replace the display assembly (see
Great user manuals database on
Replacing the Media Controls
Replacing the
Keyboard).
Replacing the Center Control
Replacing the Base
Cover).
Replacing the
Battery).
The display bezel is extremely fragile. Be careful when removing it to prevent damaging the bezel.
Before You
Begin.
Removing the Display
Before You
Begin.
Replacing the Display
UserManuals.info
Board).
Cover).
Replacing the
Mini-Card).
Assembly).
Assembly).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Studio 1747

Table of Contents