Chapter 3 Notes; Note For Time Stamp Of Trace Function - Renesas IECUBE2 User Manual

QB-V850E2
This chapter explains the common notes of IECUBE2.
3.1

Note for time stamp of trace function

A time stamp of trace function does not indicate the instruction execution time/cycle count. A time stamp
indicates a time IECUBE2 main received the trace data from a debug chip in POD. The output timing of the
trace data is a little different from the instruction execution time/cycle. And in case of including more than one
trace data per execution, such as access address and access data, some errors may be observed by FIFO
queuing.
R20UT0824EJ0101 Rev.1.01
2013.01.08
CHAPTER 3 NOTES
3.NOTES
Page 20 of 26