Connection Type: Server Connection - NEC Express5800 Series User Manual

Chapter 4 Configuring Client Settings with Atrust Client Setup

5.6.4 Connection Type: Server Connection

To configure ICA connection settings for the connection type of Server Connection, do the following:
1. On Atrust Client Setup, click Applications > Citrix ICA.
2. The available ICA Connection list appears in the Configuration area.
3. Click Add on the top of the ICA Connection list to create a new entry of ICA connection.
4. On General sub-tab, click the Connection Type drop-down menu to select Server Connection.
5. Type the session name, the IP address / FQDN of the server, user credentials, and the domain of the server.
6. Click Save to confirm. The access shortcut will be created automatically on the desktop.
Note If you have not created any entry, the ICA Connection list will be empty.
 The applicable or best suitable information type of the server side may vary with your Citrix
Note
environment. Consult your system administrator for more information.
 Only connections to XenApp servers are supported by this connection type.
Note Depending on your plan of service delivery and the configuration of your server(s), you may need
to configure other advanced ICA connection settings for service access. For more information on
other available settings, see Chapter 4, "5.8 Configuring Advanced ICA Connection Settings".
Express5800/US320f User's Guide
5. Configuring Service Access Settings
141