NEC Express5800 Series User Manual page 89

Chapter 4 Configuring Client Settings with Atrust Client Setup
4. Click drop-down menus to select the desired firmware version and other options.
Firmware Update Options
Item
Firmware Type
Firmware Version
Language
Reboot immediately
Keep ACS configuration
5. Click Update firmware to confirm your selections. The system will start updating its firmware after restart.
Click to select the desired firmware type.
Type
Firmware The system image of a client.
Snapshot The system image of a client coming from another client of the same model.
Click to select the desired firmware version from the Firmware list.
Click to select the interface language of the system, including the Atrust Client Setup console.
NOTE: Available languages may vary with the firmware version.
Click to choose whether to restart the system immediately for firmware update or manually restart
the system later.
Click to choose whether to keep client settings under Atrust Client Setup.
NOTE: If Yes is selected, all client settings under Atrust Client Setup will remain unchanged after
firmware update. If No is selected, all settings will be restored to the factory default.
NOTE: If the client is managed by Atrust Device Manager and here No is selected, Atrust Device
Manager will fail to manage the client after firmware update. For more information on Atrust Device
Manager, refer to the User's Guide of Atrust Device Manager.
Express5800/US320f User's Guide
2. Configuring System Settings
Description
Description
89