NEC Express5800 Series User Manual page 33

Chapter 1 About US320f
3. Mount the stand on US320f by using the screws for the body.
4. Use the screws for the monitor to mount US320f on the mounting holes on the monitor so that the front of US320f
faces left. See the figure below.
Important  Do not use US320f with the stand being removed.
 Use two screws to mount US320f on the monitor.
Tips
 The location of the mounting holes depends on the monitor size.
Refer to the manual that comes with your monitor.
 To remove US320f from the monitor, reverse the steps (1) through (4) in "3.1.2 Mounting on
the back of a monitor" to remove US320f and mount the stand.
 Do not change combination of US320f and the stand.
Express5800/US320f User's Guide
3. Installation and Connection
Screw hole
Screw hole
33