Activating Us320F - NEC Express5800 Series User Manual

Chapter 6 System Administration
4.

Activating US320f

This section describes how to activate (authenticate) US320f (Windows 10 IoT Enterprise LTSB). You need to activate
US320f to use all the features of Windows 10 IoT.
US320f is activated when shipped from the factory. However, if the firmware image of US320f is upgraded or recovered
using ADM (Atrust Device Manger) or Atrust Device USB Disk Creator, US320f must be activated again.
You can activate US320f via the Internet or by phone.
212
Important  US320f supports automatic activation. When US320f is connected to a network connected to
the Internet, activation is automatically executed in the background when US320f starts up.
This means that you do not have to manually authenticate the license.
 In US320f, activation information is registered in the UWF "through" list. The activation status
is therefore retained even after US320f restarts, allowing activation with UWF enabled.
Express5800/US320f User's Guide
4. Activating US320f