Mounting On The Back Of A Monitor - NEC Express5800 Series User Manual

Chapter 1 About US320f

3.1.2 Mounting on the back of a monitor

Mount US320f on the back of a monitor by using the stand.
You can mount your US320f on a monitor conforming to VESA.
1. Place your US320f with its bottom facing up, and remove the screw located in the center.
Store the removed screw inside the stand.
Important It is highly recommended to store screws inside the stand when not needed to prevent them
The screw head must face inside.
getting lost.
Express5800/US320f User's Guide
3. Installation and Connection
31