Connection - NEC Express5800 Series User Manual

Chapter 1 About US320f
3.2

Connection

Connect US320f to your network.
After connecting the network cable and other cables, connect the AC adapter that comes with US320f to US320f and plug
the power cord into the wall socket.
Important  Before connecting US320f, turn off US320f and peripherals to be connected. Failure to follow
Observe the following instructions to use US320f safely. Failure to follow these instructions
may result in death or serious personal injury. For details, see Precautions for Use.
 Do not hold the power plug with a wet hand.
Observe the following instructions to use US320f safely. Failure to follow these instructions
may cause a fire, personal injury, or property damage. For details, see Precautions for Use.
 Plug into a proper power source of the specified voltage.
 Do not connect exceeding number of power cords to a power outlet to prevent excessive
electrical load.
 Do not use US320f with any loose interface connection.
 Use the authorized power cord only.
 Do not connect any interface cable with the power cord of US320f being connected to a
power source.
 Do not use any unauthorized interface cable.
this may cause malfunction or failure.
 Before connecting a third-party peripheral or interface cable to US320f, ask the dealer whether
the device or cable can be used for US320f. Some third-party devices cannot be used for
US320f. NEC does not bear any responsibility for faults caused by using third-party peripherals
or interface cables not authorized by NEC.
Note To connect a display via a VGA interface, use the DVI-VGA adapter that comes with US320f.
Express5800/US320f User's Guide
3. Installation and Connection
35