Chapter 1 About US320f
4.
Setting up the System BIOS
This section describes how to set up the Basic Input Output System (BIOS).
Read this section before installing US320f or adding or removing optional devices.
4.1
Overview
SETUP is a utility intended for basic hardware setup. The SETUP utility can run without any exclusive utilities because it is
installed in the flash memory incorporated in US320f.
Because the SETUP settings specified at shipment are the most standard and optimal settings, SETUP is not required in
most cases. Use SETUP in the cases described below as necessary.
Important Ask the system administrator to operate SETUP.
SETUP allows you to set passwords.
The latest version SETUP is installed in US320f. Accordingly, the actual setting screens may
differ from those described in this guide. For the actual setting items, see the online help or
contact your service representative.
Be sure to close SETUP by selecting the Save & Exit menu or pressing <ESC> key or < F4> key.
Turning off the power of US320f or resetting US320f with SETUP activated may cause the
settings of SETUP to be updated incorrectly.
Express5800/US320f User's Guide
4. Setting up the System BIOS
37