Connection Type: Remote Web Access - NEC Express5800 Series User Manual

Chapter 4 Configuring Client Settings with Atrust Client Setup

5.3.2 Connection Type: Remote Web Access

To configure RDP connection settings for Remote Web Access connection type, do the following:
1. On Atrust Client Setup, click Applications > Remote Desktop.
2. The RDP Connection list appears in the Configuration area.
3. Click Add on the top of the RDP Connection list to create a new entry of RDP connection.
4. On General sub-tab, click the Connection Type drop-down menu to select Remote Web Access.
5. Type in the session name and connection URL through which Web-based remote applications/desktops is
accessible.
6. Click Save to add this RDP connection entry.
7. The shortcut for Remote Web Access connection is automatically created on the desktop.
122
Note Your US320f supports only RD Web Access based on Windows Server 2016 or Windows Server 2012
R2; Windows Server 2008 R2 based is not supported.
Note If you have not created any entry, the RDP Connection list will be empty.
 The red asterisks indicate the required fields.
Note
 Consult your system administrator for the appropriate connection URL.
Note Depending on your plan of service delivery and the configuration of your server(s), you may need
to configure other advanced RDP connection settings for service access. For more information on
other available settings, see Chapter 4, "5.5 Configuring Advanced RDP Connection Settings".
Express5800/US320f User's Guide
5. Configuring Service Access Settings