Table of Contents
Advertisement
EDITION 09 /2015
OPERATING MANUAL
5
STARTING UP AND OPERATING
5.1
INSTALLATION AND CONNECTION
The Unica 4-270 N diaphragm pump can be wall-mounted or fl oor-mounted.
For an example of typical installation, see Paragraph 5.1.6. The picture does not represent
the most suitable solution in all situations and it's given only as mere example. Please
refer to a Wagner authorised technician for further information about the best mounting
solution for each user's special needs.
To make operation and maintenance easier, install the pump so that the pneumatic
supply inlet and the pneumatic supply/suction fi ttings are easily accessible.
Install the pump in a horizontal position.
To have support about how to integrate the pump in a pre-existing plant or for a
customised location, please refer to a Wagner authorised technician.
Always use original Wagner spare parts.
5.1.1
PUMP WALL-MOUNTING INSTALLATION
The Unica 4-270 N pump installation kit for wall-mounting can be supplied on request.
Part number:
Wall mounting kit:
For any information regarding the kit's content and assembling, please refer to the corre-
spondent paragraph in chapter 7 - Accessories.
5.1.2
PUMP INSTALLATION ON GROUND FRAME
The Unica 4-270 N pump installation kit on ground frame can be supplied on request.
Part number:
Ground frame kit:
For any information regarding the kit's content and assembling, please refer to the corre-
spondent paragraph in chapter 7 - Accessories.
Inclined surface!
Risk of accidents if the unit rolls away/falls.
SIHC_41_0012_GB
PART NO. ZZB028ENG
T6151.00
T6148.00
WARNING
Place the frame with the pump horizontally.
Lock the frame.
Unica 4-270 N
.
21
Advertisement
Table of Contents
