D Schematic - Ublox C102-F9R User Manual

C102-F9R - User guide
12. Connect receiver to u-center.
13. Open NTRIP client: Receiver > NTRIP client.
14. Input correction service provider credentials.
15. Select OK.
16. NTRIP client status can be monitored in the lower part of the u-center frame, see the circle in the
figure below.
17. Fix status can be monitored with the docking windows > data view.

D Schematic

The following pages include the complete schematic for the C102-F9R board. Note that the GNSS
module in the schematic is F9K, but otherwise the schematic is accurate.
UBX-20029244 - R03 Appendix Page 25 of 32
C1-Public