Table of Contents
Advertisement
Power on the device. The following startup message should be displayed in the terminal window:
4. Setting up the configurable CAN feature:
4.1. Open the RealTerm Send tab.
4.2. Generate CONFIG SET message(s) in the MSG tool.
4.3. Copy and paste a CONFIG SET message into the text field.
4.4. Send the message by selecting the Send Numbers button.
The following dialog should be displayed when a configuration has been accepted:
When all configuration messages have been sent:
4.5. Generate a CONFIG GET message.
4.6. Send the CONFIG GET message.
4.7. A dialog similar to the one shown below should be displayed and can be used to validate the
configurations.
UBX-20029244 - R03
C1-Public
Configurable CAN interface
C102-F9R - User guide
Page 12 of 32
Advertisement
Table of Contents
