Support Information; Introduction; Interconnect Signals; Connector P1 Interconnect Signals - Motorola M68360QUADS-040 User Manual

5.1

INTRODUCTION

This chapter provides the interconnection signals, parts list, and schematic diagrams of the
M68360QUADS-040 board.
5.2

INTERCONNECT SIGNALS

The M68360QUADS-040 board interconnects with external devices through the following connectors:
• P1 is 37 pin, male D type connector, for the ADI port.
• P2 is 9 pin, female D type connector, for the RS-232 port.
• P3 is 15 pin, female D type connector, for AUI connection to the EEST Ethernet port.
• P4 is 8 pin, RJ-45 connector, for twisted-pair connection to the EEST Ethernet port.
• P5 is 15 pin, female D type connector, for AUI connection to the (AMD's) SIA Ethernet port.
• P6 is 3 pin connector for 5v power supply input: GND (x2) and +5V
• P7 is 2 pin connector for 12v power supply input: GND and +12V
• P8 and P9 are 96 pin DIN connectors for Logic analyzer connection.
1 2
• P10 & P11
5.2.1

Connector P1 Interconnect Signals

Connector P4 is a 37 pin, male D-type connector. It is the ADI port of the M68360QUADS-040. TABLE 5-
1 describes the P1 connector signals.

TABLE 5-1 Connector P1 Interconnect Signals

Pin No. Signal Name
1 INT_ACK
2 -
3 HST_ACK
4 ADS_ALL
5 ADS_RESET
6 ADS_SEL2
7 ADS_SEL1
8 ADS_SEL0
9 HOST_REQ
10 ADS_REQ
11 ADS_ACK
12 ADS_INT
13 HOST_BRK~
14 ADS_BRK
1. Connector P10 has identical pinout to P8
2. Connector P11 has identical pinout to P9
Freescale Semiconductor, Inc.
M68360QUADS-040 Hardware User's Manual

5 - SUPPORT INFORMATION

are 96 pin DIN connectors for off-board hardware expansions.
Description
Interrupt Acknowledge input signal from the host
Not connected
Host Acknowledge input signal from the host
QUADS-040 All input signal from the host
QUADS-040 Reset input signal from the host
QUADS-040 Select 2 input signal from the host
QUADS-040 Select 1 input signal from the host
QUADS-040 Select 0 input signal from the host
HOST Request input signal from the host
QUADS-040 Request output signal from the M68360QUADS-040 to the host
QUADS-040 Acknowledge output signal from the M68360QUADS-040 to the
host
QUADS-040 Interrupt output signal from the M68360QUADS-040 to the host
HOST Break open collector output signal from the M68360QUADS-040 to the
host
QUADS-040 Break input signal from the host
For More Information On This Product,
Go to: www.freescale.com
SUPPORT INFORMATION
41