Procom DGC-202 Series Operating Instructions Manual page 28

Over Current The current above which the over current fault
monitoring will start. The timer for it is over
load delay. This fault is only enabled while the
generator is running. On expiry of the timer the
generator is stopped.
Over Load Delay This is the timer for the over load condition
either due to over KW or over current. On
expiry of this timer the engine shall be stopped.
Digital Input 1 This can be assigned to any of the function
from this list.
1
50 1-9999
5 1-100 Sec
None RWL
Oil Level
Earth Fault
Canopy Temp
Emergency
HET
Fuel
LLOP
R. Start/Stop
R Stop
R Start
Auto/Man
None