Procom DGC-202 Series Operating Instructions Manual page 18

Over Load
Voltage Unbalance
A
Current Unbalance
A
11.2 Warning Icons
ICON DESCRIPTION
LLOP Sensor
Open
HWT Sensor
Open
FUEL Sensor
Open
Sensor Common
Open
Battery
KVA Warning
11.3 Operation Icons
Mains
Generator
Voltage
Frequency
Hz
RPM
Current
Active Power This icon shows the active power of Mains or Generator. When Mains
P
The current or KW derived from the genset is above the
programmed limit.
The unbalance in the voltage between the phases.
The unbalance in the current between the phases.
NOTES
Oil pressure sensor has been detected as being open circuit
when sensor open is selected as warning.
HWT sensor warning has been detected as being open
circuit when sensor open is selected as warning.
Fuel sensor warning has been detected as being open
circuit when sensor open is selected as warning.
Sensor Common Open warning has been detected when
sensor common pin is open.
The DC supply has fallen below or risen above the low/high
volts setting level.
When power of generator in KVA reaches to set value, then
KVA warning occurs.
This
icon
indicates
that
the
parameters
shown
on
the
screen
are
of

This
icon
indicates
that
the
parameters
shown
on
the
screen
are
of

Generator.
Voltage of Mains or Generator.
Frequency of Mains or Generator.
RPM of Generator.
This icon shows the current of Mains or Generator. When Mains contactor
is connected, it shows Mains current. When Generator contactor is
connected, it shows Generator current.
contactor is connected, it shows Mains active power. When Generator
contactor is connected, it shows Generator active power.