Table of Contents
Advertisement
Product overview
Resolution
The resolution of measured values and raw values depends on the parameters "Measuring range" and
"Sampling rate". The table below shows how these parameters influence the resolution:
Measuring range
Sampling rate /
EtherCAT cycle time
±2 g
≤ 1 kHz /
≥ 1 ms
±4 g
±8 g
±16 g
±2 g
> 1 kHz /
< 1 ms
±4 g
±8 g
±16 g
The setting of the "Measuring range" and "Sampling rate" parameters is described in the chapter Settings
[} 25].
Additional tests
The devices have undergone the following additional tests:
Test
Vibration
Shocks
12
Explanation
10 frequency sweeps in 3 axes
5 Hz < f < 60 Hz displacement 0.35 mm, constant amplitude
60.1 Hz < f < 500 Hz acceleration 5 g, constant amplitude
1000 shocks in each direction, in 3 axes
35 g, 11 ms
Version: 1.4
Resolution
Raw values
10-bit
8-bit
Measured values
4 mg
8 mg
16 mg
48 mg
16 mg
32 mg
64 mg
192 mg
EP3752-0000
Advertisement
Table of Contents
