Oxley Creek WWTP Water Reclamation
(Probe LU Manual) Vendor Manual
Installation
WARNINGS:
• Installation shall only be performed by qualified personnel and in
accordance w ith local governing regulations.
• SITRANS Probe LU is to be used only in the manner outlined in this
manual, otherw ise protection provided by the equipment may be
impaired.
Notes:
•
Please refer to the device nameplate for approval information.
•
Ideally, mount SITRANS Probe LU so that the face of the transducer is at least
300 mm (1 ft) above the highest anticipated level.
M ounting Location
Recommendations:
•
Ambient temperature within –40 to +80 °C (–40 to +176 °F).
•
Easy access for viewing the display and programming via the handheld programmer.
•
An environment suitable to the housing rating and materials of construction.
•
Keep the sound path perpendicular to the material surface.
.
ambient temperature
surrounding enclosure
–40 to +80 °C (–40 to +176 °F)
process temperature
–40 to 85 °C (–40 to 185 °F)
7ML19985JB02
SITRANS Probe LU (PROFIBUS PA) – INSTRUCTION MANUAL
Doc Id: VM11
Active Date: 15/12/2006
flange adaptor (option)
customer-supplied
flange
Page 11