Linearization - Siemens Sitrans Probe LU Instruction Manual

Oxley Creek WWTP Water Reclamation
(Probe LU Manual) Vendor Manual
2.5.3. Min. Sensor Value (default 0.25 m)
Defines the minimum usable value for the measuring range (physical limit of the
sensor) in Sensor units.
Open menu
click on the reset button, and download to the device.
2.5.4. Max. Sensor Value (6 m or 12 m, depending on unit)
Defines the maximum usable value for the measuring range (physical limit of the
sensor) in Sensor units.
Open menu
click on the reset button, and download to the device.
2.5.5. Process Temperature Min.
The minimum recorded temperature of the internal electronics.
Open menu
click on the reset button, and download to the device.
2.5.6. Process Temperature Max.
The maximum recorded temperature of the internal electronics.
Open menu
click on the

2.6. Linearization

Carries out a volume conversion from a level value.
2.6.1. PV (volume/level) Units (default %)
Select units for either volume or level.
Hand
programmer
values
2.6.2. Linearization Type/Tank Shape (default None)
Defines the tank shape and allows the Probe LU to calculate volume instead of
level. If
shape matching the monitored tank or reservoir (see table on next page).
7ML19985JB02
button, and download to the device.
is selected, no volume conversion is performed. Select the tank
SITRANS Probe LU (PROFIBUS PA) – INSTRUCTION MANUAL
and select the tab
and select the tab
and select the tab
and select the tab
mm
ft
in
%
3
m
L
3
ft
3
in
Doc Id: VM11
Active Date: 15/12/2006
or If necessary,
or If necessary,
If necessary,
If necessary,
Page 83