Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Workrite Ergonomics Sierra HX
Summary of Contents for Workrite Ergonomics Sierra HX
- Page 1 Workrite Sierra HX™ & HXL™ Assembly Instructions for 2-leg Electric Workcenters #1500215- Rev A...
-
Page 2: Parts, Sold Separately
Workrite Sierra HX & HXL Electric Workcenters - Assembly Instructions for 2-leg Tables List of Parts, grouped by carton #12 × ¾" Pan Head Short Bracket Rear Bracket Laminate Top Screw Qty: 4 Qty: 1 Qty: 32 #8 × ⅝" Pan Head Screw Qty: 12... - Page 3 Workrite Sierra HX & HXL Electric Workcenters - Assembly Instructions for 2-leg Tables Verify that you have all the hardware and tools needed for the assembly. Check your cartons against the list on page 2 to verify that you have all the parts needed. You will...
- Page 4 Workrite Sierra HX & HXL Electric Workcenters - Assembly Instructions for 2-leg Tables Attach Base to Worksurface and Tighten Screws 3 screws per Short Bracket If you do not have a Workrite worksurface skip to step If you have a Workrite worksurface:...
- Page 5 Workrite Sierra HX & HXL Electric Workcenters - Assembly Instructions for 2-leg Tables Attach loosely using Pan Head Top Screws 3 screws per (K). If you use an electric screwdriver, be Short Bracket sure it is on the lowest torque setting to avoid stripping the holes in the top.
- Page 6 Workrite Sierra HX & HXL Electric Workcenters - Assembly Instructions for 2-leg Tables Attach Control Box to Tabletop Position Control Box (P). If you have a Workrite tabletop: Locate the four pilot holes for the Control Box and proceed to Step...
- Page 7 Workrite Sierra HX & HXL Electric Workcenters - Assembly Instructions for 2-leg Tables Attach Cable Spools and Cable Loops Attach Cable Spool (Q) with the #12 × ¾"Pan Head Laminate screw (K) and Cable Loops (R) to underside of worksurface using #8 × ⅝"Pan Head Screw (L) making sure to wrap the Cable Loop around the cable prior to attaching. If you do NOT have a Workrite worksurface, mount cable spools in a convenient location between legs and control box.
-
Page 8: Cleaning Instructions
Workrite Sierra HX & HXL Electric Workcenters - Assembly Instructions for 2-leg Tables Connect Power Cord to the Power Supply and put workcenter upright Connect the Power Cord (S) to the Power Supply. Turn the table over into an upright position.
Need help?
Do you have a question about the Sierra HX and is the answer not in the manual?
Questions and answers