Triumph Tiger XR Owner's Handbook Manual page 156

Maintenance
Remove any items of jewellery such as
rings, watches, zips or belt buckles,
which may scratch or otherwise damage
painted or polished surfaces.
Use separate cleaning
cleaning cloths for washing painted/
polished surfaces and chassis areas.
Chassis areas (such as wheels and
under fenders) will be exposed to more
abrasive road grime and dust, which
may then scratch painted or polished
surfaces, if the same sponge or cleaning
cloths are used.
Where to be Careful
Avoid spraying water with any great
force near the following places:
• Instruments;
• Brake cylinders and brake calipers;
• Under the fuel tank;
• Air intake duct;
• Steering head bearings;
• Wheel bearings.
Caution
Do not spray any water at all under
the rider's seat. The rider's seat has
the engine's air intake duct installed to
its base and any water sprayed in this
area could enter the airbox and
engine, causing damage to both items.
Caution
Use of high-pressure spray washers is
not recommended.
pressure washers,
forced into bearings
components causing premature wear
from corrosion and loss of lubrication.
156
sponges or
When using
water may be
and other
Note:
• Use of soaps that are highly
alkaline will leave a residue on
painted surfaces, and may also
cause water spotting. Always use a
low alkaline soap to aid the cleaning
process.
After Washing
Remove the plastic bags and tape, and
clear the air intakes.
Lubricate the pivots, bolts and nuts.
Test the brakes
operation.
Start the engine and run it for 5
minutes. Ensure adequate ventilation
for the exhaust fumes.
Use a dry cloth to absorb water residue.
Do not allow water to stand on the
machine as this will lead to corrosion.
Warning
Never wax or lubricate the brake discs.
Loss of braking power and an accident
could result. Clean the disc with a
proprietary brand of oil-free brake disc
cleaner.
Unpainted aluminum Items
Items such as brake and clutch levers
must be correctly cleaned to preserve
their appearance.
Use a proprietary brand of aluminum
cleaner which does not contain abrasive
or caustic elements.
Clean aluminum items regularly, in
particular after
weather, where the components must
be hand washed and dried each time
the machine is used.
before motorcycle
use in inclement