Adjusting The Speed While In Cruise Control - Triumph Tiger XR Owner's Handbook Manual

General Information
The set speed can be resumed by
pressing and releasing the RES/+ adjust
button provided
described on page 56 have been met.
ON
1. Cruise control adjust button, RES/+
2. Cruise control adjust button, SET/-
A stored set speed is indicated by the
word SET, below the cruise control
symbol in the display screen. The stored
set speed remains in the cruise control
memory until the ignition switch has
been turned to the OFF position.
58
the conditions
1
RES /+
SET /-
2
Adjusting the Speed while in
Cruise Control
Increasing Speed while in Cruise
Control
To increase the speed, press and release
the RES/+ adjust button. Each press of
the button will increase the speed by 1
km/h or 1 mph. If the button is held, the
speed continuously increases in single
digit increments. When the desired
speed is shown in the display, release
the adjust button.
1. Display screen
While increasing the speed, the display
screen in the instruments will change to
SEt, and will show the new set speed.
The new set speed will flash until the
motorcycle has achieved the speed.
After four seconds the display screen
will change to the previous display.
Note:
• If riding up a steep incline and
cruise control is unable to maintain
the set speed, the instruments will
change to SEt, show the set speed
and will flash until the motorcycle
has regained the speed.
1