Rear Suspension Adjustment - Triumph Tiger XR Owner's Handbook Manual

The Solo suspension settings provide a
comfortable ride and good handling
characteristics for general, solo riding.
The charts above show suggested
settings for the rear suspension.
An increase in spring preload requires
firmer damping, a reduction in spring
preload requires softer damping.
The damping must be adjusted to the
road conditions and the spring preload.
Warning
Ensure that the
between front and rear suspension is
maintained. Suspension
could significantly change handling
characteristics leading
control and an accident. Refer to the
front and rear suspension setting
charts for further
consult your dealer.
Note:
• The motorcycle is delivered from
the factory
suspension set at the Solo (normal)
riding settings, as shown in the
relevant suspension chart (see page
134).
• These charts are only a guide.
Setting requirements may vary for
rider weight
preferences.
pages for information regarding

rear suspension adjustment.

Rear Suspension Adjustment
The Rear Suspension Unit (RSU) on Tiger
XR model variants is adjustable for
spring preload.
correct balance
imbalance
to loss
information
with the rear
and personal
See the following
The RSU on Tiger XC model variants is
adjustable
rebound damping.
Spring Preload Adjustment –
Tiger XR- All Models
of
cgjm
1. Spring preload adjuster, Tiger XR
The spring preload adjuster is situated
or
on the right
motorcycle, at the top of the RSU.
To adjust the spring preload setting
rotate the slotted adjuster clockwise to
increase,
decrease.
Note:
• The setting is measured as the
number of clicks counterclockwise
from the fully clockwise (closed)
position.
• The motorcycle is delivered from
the factory with the spring preload
set at the Solo (normal) riding
settings, as shown in the relevant
suspension chart (see page 134).
Maintenance
for spring preload
1
hand side
or counterclockwise
and
of the
to
135